1. Introduction
This BMWR series manual wheelchair ramp can be used for van and minivan.
This ramp consists of two or three honeycombs penal which are hinged joint to fold and unfold. One of the advantages of this ramp is that the operation is completely manual, which is simple, easy, and safety. This is the best choice for the vehicle which floor is a little high and installation space is limited.
This ramp is mainly made from aluminum profile and honeycombs penal. We apply honeycombs penal with figure, which has the advantages of anti-skidding, light weight, high-load capability and so on.
There are air springs at the sides of ramp, which can make the operation easy, and avoid ramp unfolding by itself when emergency brake
2. Advantages
Easy installation: This ramp will be fully assembled before delivery. After receive this ramp, first read the user manual. Make holes on vehicle according to the user manual, and then mount it.
High loading capacity: Material of platform is high-strength aluminium alloy, which is strong, light and anti-skip.
Wide application: When unfold the platform, this equipment will first reduce vehicle floor height, so it can be widely used for van and minivan
Small installation requirements: Floor height should be less than 500mm, and size of rear door should be over 1050*1200mm (W*H).
3. Function
Safety: Main material is high-strength aluminium alloy, loading capacity can be 350KG.
Installation: Installed at rear door, after unfolded, there will be a slop which can help wheelchair get in/out of vehicle.
Adjustment:
We can make ramp size according to customer's requirements.
| platform |
Overall Width |
Overall Height |
Base Width |
Volt |
Loading Capacity |
Net width of rear door |
Net height of door |
| 1910*810mm |
937 mm |
850 mm |
251 mm |
|
350KG |
1050mm |
1200mm |
){kind=link}
){kind=link}