Manual Wheelchair Ramp for City Bus (FMWR-1A) Loading 350kg

• Customization: Available
• After-sales Service: on Line Techical Service
• Warranty: 12 Months
• Model NO.: FMWR-1A
• Type: Wheelchair Ramp
• Material: Aluminum
• Platform Size: 885*920
• Loading Capacity: 350kg
• Overall Width: 952mm
• Overall Length: 903mm
• Overall Height: 40.5mm
• Platform: Aluminum or Anti-Skip Covering
• Own Weight: 35kg
• Door Width Required: 932mm
• Transport Package: Carton or Wooden Case
• Specification: 885 * 920mm
• Trademark: XINDER
• Origin: China
• HS Code: 84289090
• Production Capacity: 1000 units

Product Description

Product Description

INTRODUCTION:

This FMWR-1A fold manual wheelchair ramp can be applied for low-floor city bus, and can be installed on the vehicle floor.
It also should be controlled manually and the material of base is aluminum. It is installed on the vehicle floor, when need it, you just unfold the ramp. There will be a slope which can help the disabled get into/out of vehicle.
The operation of manual wheelchair ramp is easy, simple, independent and wholly manual, because it doesn't need to connect with vehicle electric system. This ramp takes no space of vehicle. Moreover, the platform of ramp and the floor of vehicle are at the same level, so there is no effect for passengers.

Our Advantages

ADVANTAGES

Interlock system: There is magnet in the ramp, and there is proximity switch at the left of ramp, so that the driver can know whether the ramp is under performance status. When the ramp is used, the vehicle door can not be opened, and there will be warning signal at the instrument desk.
Easy installation: This ramp has been assembled before delivery, so the only thing that customer need to do for installation is to drill holes with right size, and then mount the ramp according to installation instruction, which is easy and simple. Ramp working platform adopts anti-skidding honeycomb board, so that this ramp has many advantages, such as light, powerful loading capacity, strong non-corrodibility and so on.
Low installation requirements: This ramp is mainly applied for low-floor city bus. It is installed on the vehicle floor, and it doesn't take up any room of vehicle when it isn't used. Meanwhile, there is no requirement for height of vehicle floor.

SAFETY
1. Adopt anti-skid aluminum plate on the surface of platform
2.  With danger symbol on the outer-edge of ramp
INSTALLATION
Be installed on the vehicle floor. When need it, you just unfold the ramp. There will be a slope which can help the disabled get into/out of vehicle.

Product Parameters

SPECIFICATIONS:

INSTALLATION REQUIREMENTS

model	platform size	Drive Mode(L*W)	Loading capacity
FMWR-1A	Manual	885 * 920mm	350KG
FMWR-2A	Manual	976 * 920 mm	350KG

Detailed Photos