This BEWR-1 electric wheelchair ramp consists of two high-strength aluminium alloy which are hinged joint to fold and unfold. It can be used for van and minivan.
This ramp is operated by remote control, it is fully electric. Loading capacity can be 350KG. Meanwhile, the platform is anti-skip.
This ramp is installed at the rear door, when need it, use remote control to unfold the platform, there will be a slop to help wheelchair get in/out of vehicle.
When this ramp is unfolded, first it will reduce the floor height to reduce the slop angle. So wheelchair can get in/out of vehicle easier.
Easy installation: This ramp will be fully assembled before delivery. After receive this ramp, first read the user manual. Make holes on vehicle according to the user manual, and then mount it.
High loading capacity: Material of platform is high-strength aluminium alloy, which is strong, light and anti-skip.
Wide application: When unfold the platform, this equipment will first reduce vehicle floor height, so it can be widely used for van and minivan
Small installation requirements: Floor height should be less than 500mm, and size of rear door should be over 1050*1200mm (W*H).
Safety: Main material is high-strength aluminium alloy, loading capacity can be 350KG.
Installation: Installed at rear door, after unfolded, there will be a slop which can help wheelchair get in/out of vehicle.
We can make ramp size according to customer's requirements.
When need this ramp, first stop vehicle. Use remote control to operate this equipment.
Press "DOWN" to unfold platform;
Press "UP" to fold platform.